Ath9k: Add Debugfs Support For Mac Pro

Preparations for Turbo Mode and half/quarter rate support: Big internal update of PHY code to clean up turbo modes and reset and add half/quarter rate support (50/10MHz channel widths). These new modes are not enabled yet, and it's unlikely that there will be a standard API for enabling them in the near future, however developers/researchers can use them for various projects like 802.11p support. Synthesizer-only channel change for newer chips: On AR2413/AR5413 we now support faster channel switching by skipping normal reset and directly setting the channel on PHY while it's still active. To enable ath5k in the kernel configuration, you must first enable mac80211: Networking support - Wireless - cfg80211 - wireless configuration API Generic IEEE 802.11 Networking Stack (mac80211) Please note that in older kernels there was another 802.11 networking stack: Generic IEEE 802.11 Networking Stack You do not need this. This option enables the old SoftMAC which is already removed from newer kernels. You can still safely enable this though. You can then enable ath5k in the kernel configuration under Device Drivers -.

Ath9k: Add Debugfs Support For Mac Download

Network device support - Wireless LAN - Atheros Wireless Cards - Atheros 5xxx wireless cards support To try the driver you can do something like this: modprobe ath5k sudo ip link set wlan%d up sudo iwconfig wlan%d essid any # Make sure you get auth'd and then assoc'd # Then either set an IP manually or get it via DHCP ping gw Supported Devices. Currently supported PCI ID list with respective status report on basic-testing as defined above. Vendor:device Type Name Basic-testing 168c:0207 AR5210 AR5210 No tx - working on it 168c:0007. New bond trading platforms forex renko charts mt4 for mac.